Place stencil on the desired location - measure and mark to ensure that the stencil is straight, centered, and properly aligned before painting. Simply tape the stencil from all sides on the desired spot, be it a ground or a wall, or any other surface. Use standard spray paint to trace out your design. Wait for a few seconds and let the paint dry. Remove the tapes slowly and take off the stencil gently. Now wash or clean excess paint from the stencil and reuse. Built up paint will peel off quite easily from the stencil though. Watch our detailed video on how to apply no parking stencils.
No. The letter height will be smaller than the height of the stencil. For stencils with one liner message, available measurements include:
|
Stencil Size |
Letter Height |
|
10"x 36" |
4” |
|
12"x 42" |
6” |
|
14"x 60" |
8” |
|
18"x 84" |
12” |
For stencils, where the message spreading in two lines, these will be the measurements:
|
Stencil Size |
Letter Height |
|
16"x 24" |
4” |
|
21"x 36" |
6” |
|
24"x 48" |
8” |
|
36"x 66" |
12” |
We have stencils with messages in more than one line too. Please click on the design to know about the respective letter height on the product page. That’s not all, if you are looking to create absolutely new stencils, you can go to our Custom Stencils wizard.
No Parking stencils can be used as many times as you want. Investment in stencils pays off quickly - as you can use the same stencil to make hundreds of impressions. After each use, the stencil can be washed off easily and reused. ABS plastic stencil does not absorb paint and can be washed or cleaned with industrial solvents. The life of the stencil is based on several factors including cleaning, storage, and frequency of use. ABS stencils offer an outdoor life of 2+ years, although these stencils last much longer depending upon several factors including cleaning, storage, and frequency of use.
No Parking stencils are made of Acrylonitrile Butadiene Styrene, more popularly known as the ABS plastic. The thickness of these ABS stencils is 63 mils (1/16 inches), ideal for parking lots and other large-scale applications. ABS is chosen for stencils because this type of plastic liquifies upon heating, instead of burning, which allows it to be easily injection-molded to any cutout or shape. Also, the material is easily recyclable, causing less harm to the environment.
You can order stencil ink separately from us. The aerosol spray ink is available in 7 colors: White, Black, Dark Blue, Green, Orange, Red, and Yellow. However, there are shipping restrictions for aerosol sprays due to federal regulations (49 CFR) prohibiting air transport of hazardous materials. Therefore, these inks can be shipped via ground service only within the 48 contiguous states of the US.
|
|
|
|
|
Parking Stencil : TOW AWAY Part #:ST-0047 10" x 30" Reusable Polyethylene Stencil, 63 mil Thick Verified PurchaseGreat Product
Very well made stencil can be used hundreds of times over and over